Demo data. Everything here is synthetic and read-only: it shows how isitmyisp reports a real network.

Settings

Your ISP, your plan and your router.

Settings are read-only in this mode.

Your contracted plan

What you pay your ISP for. The speed test, the report and the network health grade measure against it.

Main ISP and backup link

If your router has two internet links, isitmyisp notices when traffic moves to the backup and when it comes back.

Main ISPExample ISP S.A. AS64500
In use nowBackup Wireless S.R.L. AS64501 Backup link

If this is your new main ISP (you changed providers), mark it as the main one.

ISP names (ASN dataset)

Not installed: ISPs are shown by IP and told apart by their /16 network. Download it to see names and compare ISPs reliably (about 7 MB from iptoasn.com, public data, no per-IP lookups).

Speed test against your plan

On Every Sunday at 03:00, plus whenever you run it.

What it does and why it can be a problem

What it does: for about 15 seconds it downloads and uploads as fast as it can against Cloudflare's public speed test (speed.cloudflare.com), and measures how much the latency grows while the link is full.

Why it can be a problem:

  • While it runs it fills your link: calls, video calls and office systems can stutter or cut for a few seconds. Schedule it when nobody is working.
  • It uses data: up to 714 MB per test with your 300 Mbps plan. Every test stops at its share of the monthly budget below.
  • On a backup link with a data cap (4G, satellite) it could use the cap up: it doesn't run on the backup unless you allow it.
  • Cloudflare sees your public IP and that you ran a test (nothing else is sent).
  • If this machine is on Wi-Fi, the result is your Wi-Fi, not your ISP. For evidence, connect it by cable.

Scheduled tests skip when an incident is open, when your router shows the link busy (SNMP), or when the budget is used up. While a test runs, verdicts pause: it never counts as a problem.

Cap per test: 714 MB (with your plan a test uses about 714 MB). Used this month: 1.1 GB of 5.0 GB.

Up to 3: your VPS, another branch, or a server inside your ISP's network. Format: host[:port], and add inside or outside if the ASN can't tell (a VPN address, say). Each one is marked inside or outside your ISP by its ASN, and comparing both tells whether the bottleneck is your access or the ISP's exit. The data cap per test is shared between all of them, Cloudflare included. iperf3 is not installed on this machine: those servers will show an error until you install it.